background image

 

MOTOR FOR SLIDING GATES 

 

SERIE GR6  –  220V

 

 

SAFETY 

 

Our compliments for your excellent choice. Your new 
electromechanical gear motor has been produced according to a 
high quality and a strict reliability, that's why it will assure you long-
lasting performances. 
This booklet will offer you all the pieces of information you may need 
to install your gear motor and to safeguard your safety. 

However, the caution is unquestionably indispensable and 
nothing is better than preventing accidents. 

All our products have been made in conformity with the regulations 
in force. 

WARNING:

 any repair or adjustment of the working machinery is 

strictly prohibited unless all the necessary precautions (electrical 
supply disconnected and motor off) have been taken in order to 
avoid possible accidents. 

WARNING:

 The feeder line has to be protected for the max. current 

in blocked rotor condition. 

WARNING: 

Install the motor on gate who are in conformity with the 

EN 12604 

WARNING:

 Execute the measurement of the force produced by the 

motor and take the measures expected by the EN 12445 

WARNING:

 any repair must be carried out by qualified people. 

All moving mechanisms must be provided with suitable protections. 

WARNING: 

Keep the automatic controls out of the reach of 

childrens. The controls must be installed at a minimum high of 1,5 
mt. from the ground surface and out of the work of mobile parts. 

WARNING: 

command pulses must be given from positions where 

the gate is visible. 

WARNING: 

use the transmitters only if you can see the gate. 

WARNING:

 GR Srl is not responsible for possible damages or 

injuries to people, objects or animals, caused by any unauthorised 
modification of the product. 
Keep scrupulously this booklet in a suitable place well known by all 
the interested people. 
In order to make the automation work efficiently; the gate to 
automate must have the following characteristics: 
- it must be balanced; 
- it must oscillate fluently; 
- you have to carry out the manual closing and opening the gate 
without any effort; 
- remember that the motorization has been planned in order to help 
you use the gate. This means that it does not resolve the problems 
caused by an inadequate installation or by a poor upkeep of the 
gate. 

 

SAFETY RULES 

  

During the installation and the use of the automation, you have to 
pay attention to the following safety rules: 
- Security distance! 
- Mechanism in movement! 
- Do not install the automation in places with presence of 
iniammable gasses! 
- Electric shock! 
- Use the gloves! 
- Use glasses for welding! 
- Keep the protection carter! 

 

EQUIPMENT 

  

In order to install the automation you have to provide yourself with 
keys, screwdriver, metre, slope detector (water level), saw, drilling 
machine and welding machine. 

 

 

 

TECHNICAL DATA 

 

 

DIMENSIONS 

 

 

 
A = 80 = DISTANCE BETWEEN THE FIXATION HOLE OF THE 
RACK AND THE SURFACE OF THE BASEMENT PLATE OF 
THE MOTOR. 
1 - GATE 
2 - BASEMENT PLATE 
B – POSITION OF BASEMENT PLATE WITH THE CORRECT 
ORIENTATION OF THE HOLE FOR THE CABLES 

 

CONFORMITY DECLARATION: 

 

It’s in accordance with Machine Directive 39/89/CE and following 
modify. 
It’s in accordance with the following directive CE: 
Electromagnetic compatibility Directive 89/336/CEE and 
following modify. 
Low tension Directive 73/23/CEE and following modify. 
Have been applied the following harmonized norms: 
EN292/1/2, EN 294, EN60335-1, UNI EN 12453, and what 
applicable of the EN12445-2000. 

 
 

GR6 220-230 Volt 

Power supply 

220-230 Vac 

Current absorbed 

1,5 Ampere 

Capacitor 

12,5 

µ

Farad

 

Power absorbed 

350 Watt 

RPM 1400 

rpm 

Thermal protection 

150° 

Torque 20,5 

Nm 

Max. thrust 

600 N 

Wotking temperature 

-25+75°C 

Lubrication Grease 
Motor weight 

6,3 – 7,5 Kg. 

Max. wing weight 

600 Kg. 

Speed 

10 m/ min. 

Protection level 

IP55 

Содержание GR6 Series









Отзывы: