26
MTS_OW100_IFU-orthogold100-US-K182682_A
an analysis of the electrode adjustment after insertion of the applicator plug. After
analysis, the number of remaining acoustic waves will be indicated in numeral values.
That may take up to 15 seconds. There will be a blue message box with the information
of “Applicator check in progress”.
Connect applicator at optional “FRD % Mode”
Setting up this mode, we get the same functions of the “FRD” mode but in this case,
the number of remaining acoustic waves will be indicated in percentage (%).
Connect applicator at optional
“Electrode Life Mode”
During the configuration of the device with the optional mode “Electrode Life Mode“,
the device performs an analysis of the electrode adjustment every time after insertion
of the applicator plug. After analysis, the number of remaining acoustic waves will be
indicated in percentage (%). That may take up to 15 seconds. There will be a blue
message box with the information of “Applicator check in progress”.
When starting to release acoustic waves, the remaining acoustic wave counter in
percentage disappears. With this option there are 2 extra functions provided:
When pressing the counter & applicator type Icon, the device performs an
electrode check, and shows up again, the electrode life/remaining acoustic
waves in percentage (%).
When applicator reaches the pre-
setup “patient shot counter limit” value (10%,
15%, 20%, 25%, 30% or 35%)*, every time the “RESET” button is pressed, the
device performs an analysis of the electrode and provides the electrode
life/remaining acoustic waves in percentage (%).
* Recommended high “patient shot counter limit” for clinics with high numbers of
patients daily.
3.3
Changing and disconnection of applicator
In the event that the shot count for the current applicator reaches to “0 or 0%” as
indicated on the display (Figure 34), the applicator must then be changed.
NOTE
When the remaining number of shots is "5000" or 5%, a message
on the touch screen will appear. This is to inform you that the
applicator will soon need to be changed.
