MSI 4260B Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

MSI 4260B Скачать руководство пользователя страница 12

8

MSI-4260 Port-A-Weigh Operator’s Manual

1.5 Features

• Designed to meet or exceed applicable US and international safety standards.
• Up to 100 hours of weighing time utilizing Automatic Sleep Mode.
• Automatic Power Off conserves battery life by sensing no activity after 15, 30,

45 or 60 minutes, determined by operator, and turns off power.

• Automatic sleep Mode preserves battery life by dimming the LED display after

5, 15, or 30 minutes of no activity.

• Rugged construction throughout. Buttons are sealed and rated for over 1 million

operations.

• Precise high resolution (2500 division standard and up to 10,000 possible) 24 bit

A/D conversion coupled with advanced RISC micro controller provides world

class features and accuracy.

• Five large, 1.2 inch (30.5 mm) LED digits for clear weight readings from a

distance. Display tilted down for easier viewing from below.

• Easy to maintain: Full digital calibration assures reliable, repeatable

measurements. Can be calibrated without test weights using MSI C-Cal

technology.

• Selectable for kg/lb unless prohibited by LFT regulations.
• Automatic or manual weight totalization for loading operations.
• Easily customized for special applications.
• Hi speed PEAK Mode for wire and rope stress analysis.
• Three Set Points can be set for any in-range weight for operator alerts or process

control.

• ScaleCore Technology providing quick and easy software updates and

calibration/setup backup.

• Two Service counters ensure Load Train safety by warning the user to perform a

Load Train safety check when the lift count gets high or the scale has been

overloaded repeatedly.

1.6 Options

Options which you may have ordered with your

Port-A-Weigh

may include the

following:

• RF Remote Controller
• RF Remote Display
• 802.11 WiFi Connectivity
• 85-265 VAC input power.
• Audible Alarm (triggered by Set Point 1)

1.7 Unpacking

When unpacking the scale from the shipping container, ensure that all assembly parts

are accounted for. Check the scale for any visible damage and immediately report any

damage to your shipper. It is advisable to use the original shipping container when

shipping or transporting the

MSI-4260

.

«
...
10
11
12
13
14
...
»

Содержание 4260B

































































Отзывы:

Нет отзывов