MSE HARRIER, Руководство пользователя

Страница: 33 / 65

33
FAST COOL mode is selected by symbol
flashing in the right upper side of
display.
It is possible to exit FAST COOL mode at any
time by pressing STOP key.
Interruption of the function is signaled by
a message.
Initial cooling or heating without centrifuging – THERMAL CHAMBER
PARAM

THERMAL CHAMBER
0 RPM

It is possible to run the centrifuge in THERMAL CHAMBER mode - cooling
for R, cooling and heating for RH (rotor is at standstill).

How to enable THERMAL CHAMBER is described in Parameters of
centrifugation chapter.
Cooling or heating in “START DELAY – OF TEMPERATURE” mode
PARAM

START DELAY – OF TEMPERATURE
2500 RPM

Centrifuging process will start, when preselected temperature is reached.

How to enable run START DELAY – OF TEMPERATURE function is described
in Parameters of centrifugation chapter.
Cooling or heating in „SHORT” mode

Cooling and heating features are available in SHORT mode.

How to enable run centrifugation in
SHORT mode
is described in
Centrifugation/SHORT mode.
Cooling and heating notes
Centrifuges with cooling (HARRIER R and HARRIER RH) are equipped with an efficient cooling
system. It allows for the desired temperatures in the chamber even at maximum spin speed or fast to
be reached quickly (e.g. 4⁰C and 36⁰C). Note that the amount of time needed to reach a set
temperature is dependent on multiple factors, including: the power of the cooling system, the shape
of the rotor, the rotor speed, ambient temperature, etc. The accuracy of the temperature stability of ±
1 ⁰ C is d etermined by the installation place of the temperature sensor.