MSE HARRIER, Руководство пользователя, Страница: 54 / 65

54
10 Maintenance
Cleaning of the centrifuge

Pull the mains plug before cleaning.

Before any cleaning or decontamination process other than that is
recommended by the manufacturer, the user should ask the manufacturer
if the event the planned process should damage the device

For cleaning, water with soap or other water soluble mild detergent shall be
used.

Avoid corrosive and aggressive substances. It is prohibited to use alkaline
solutions, inflammable solvents or agents containing abrasive particles.

Do not lubricate the centrifuge motor shaft.

If unused, the centrifuge should have its cover left open.
Once a week

Using a wiping cloth, remove any condensate or residues of the products
from the rotor chamber.
Once a month

Check the rotor clamping thread. In case of damage, replace it.

Check the centrifuging chamber for any damage. In case of damage, it can
not be longer be used. Notify authorised service workshop.
Maintenance of centrifuge elements

The rotor pins should always be lubricated with petroleum jelly.

In this way, uniform deflection of the buckets and a quiet centrifuge
operation is ensured.
Cleaning of the accessories

In order to ensure safe operation, carry out regular and periodical
maintenance of the accessories.

Rotors, buckets and round carriers have to withstand high stresses
originating from the centrifugal force. Chemical reactions as well as corrosion
(combination of variable pressure and chemical reactions) can cause
destruction of metals. Hard to observe surface cracks increase gradually and
weaken material without visible symptoms.
Wipe rotor’s pins clean and dry with a paper towel after approx. 400 uses, clean