MSE HARRIER, Руководство пользователя, Страница: 16 / 65

16
Construction
The centrifuge has a rigid self-supporting structure. The housing is made of sheet aluminium, the
back is made of steel sheet. Front and cover are made of ABS type plastic. The cover is fixed on steel axles
of hinges and from the front, it is locked with an electromagnetic lock blocking any possibility of opening
during centrifugation. The rotation chamber casing is made of thick steel sheet. The rotation chamber is
made of stainless steel sheet.
Name plate
Rotor and accessories installation

Connect the centrifuge to the mains (master switch on the back of the centrifuge).

Turn on the centrifuge (button on the side of the centrifuge).

Open the cover of the centrifuge by pressing the COVER key (see section Centrifuging/Control
Panel). Prior to putting the rotor in, please ensure that the rotating chamber is free of impurities,
e.g. such as dust, glass splinters, residues of fluids that must be taken away.

Fit the rotor on the motor shaft screwing it tight on the cone.

Screw-in the clamp for fixing the rotor (clockwise). Ensure it is tight with the supplied spanner for
the rotor.

Swing-out rotors have to be provided with the buckets in all seats. Please remember that every
buckets swings individually and freely. Bucket suspension studs (trunnoin pins) should be lubricated
periodically with petroleum jelly.
Centrifuge model
Catalogue number
Power supply parameters
Rating power
Type and mass of refrigerant
Maximum speed
Date of manufacturing
Serial number
Information about
manufacturer
CE compliance
Fuse type
Refrigerant does
not contain CFC.
Product should
not be disposed
with other waste.
Dispose according
to national law.
Pay attention when you are seeing this symbol.
Operating of centrifuge may be potentially
harmful.
In Vitro
Diagnostic
device
Read user
manual