MSD SECTOR Image 2400 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 56

background image

FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Disclaimer of Warranty and Liability
MESO SCALE DIAGNOSTICS, LLC. (“MSD”) MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, AND HEREBY
EXPRESSLY EXCLUDES AND DISCLAIMS ANY AND ALL REPRESENTATIONS AND WARRANTIES WITH REGARD TO THIS
INSTRUMENT MANUAL (THIS “MANUAL”), INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY,
SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE, DATA ACCURACY, SYSTEM INTEGRATION, QUIET TITLE OR
NONINFRINGEMENT. NO STATEMENT IN THIS MANUAL SHALL BE INTERPRETED TO GRANT OR EXTEND ANY WARRANTY ON
THE PRODUCTS DESCRIBED HEREIN. MSD SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR
ANY DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR PUNITIVE, WHETHER ARISING IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, THAT MAY BE INCURRED IN
CONNECTION WITH THE FURNISHING, PERFORMANCE OR USE OF THIS MANUAL.
Changes in Publication
The information contained in this Manual is subject to change without notice.
Unauthorized Use of Manual Material
No part of this Manual may be duplicated, reproduced, stored in a retrieval system, translated, transcribed, or transmitted in any form
or by any means without the express prior written permission of MSD. This Manual shall be returned to MSD within two (2) business
days following any request by MSD.
Unauthorized Use of Trademarks or Service Marks
MESO SCALE DISCOVERY, MESO SCALE DIAGNOSTICS, MSD, DISCOVERY WORKBENCH, MULTI-ARRAY, MULTI-SPOT,
QUICKPLEX, SECTOR, SECTOR PR, SECTOR HTS, SULFO-TAG, V-PLEX, STREPTAVIDIN GOLD, MESO, www.mesoscale.com,
SMALL SPOT (design), 96 WELL 1, 4, 7, & 10-SPOT (designs), 384 WELL 1 & 4-SPOT (designs), MSD (design), and SPOT THE
DIFFERENCE are trademarks and/or service marks of Meso Scale Diagnostics, LLC. Unauthorized use of any MSD trademark or
service mark may be a violation of federal and state trademark laws and is strictly prohibited by Meso Scale Diagnostics, LLC.

All other trademarks or service marks are the property of their respective owners.
© 2013. Meso Scale Diagnostics, LLC. All rights reserved.

Manual Part Number: 3-1200-0B0007-J
November 2013
Printed in USA

«
1
2
3
4
...
»

Содержание SECTOR Image 2400

























































Отзывы:

Нет отзывов

Похожие инструкции для SECTOR Image 2400

Бренд: Jata hogar Страницы: 24

Бренд: Acculab Страницы: 59

Бренд: Portal 724 Страницы: 8

Бренд: EMGA Страницы: 37

Бренд: Cambridge Scale Works, Inc. Страницы: 9

Бренд: ADE Страницы: 12

Бренд: AWS Страницы: 4

Бренд: AMW Страницы: 4

Бренд: TEC Страницы: 4

Бренд: Adam Equipment Страницы: 40

Бренд: Adam Equipment Страницы: 76

Бренд: WUNDER Страницы: 7

Бренд: OBH Nordica Страницы: 20

Бренд: Tanita Страницы: 81

Бренд: Terraillon Страницы: 93

Бренд: Medisana Страницы: 118

Бренд: WUNDER Страницы: 16

Бренд: SENSSUN Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды