2. Battery Installation
5. Start Measurement
Open the App and turn on the Bluetooth of your
phone, sign up your account and follow the guideline
to set up your profile and connection step by step.
Being aware of it, the scale has to be on when you
start to connect with it.
All measurements you taken can be saved in history
for detail review anytime anywhere by getting access
to your own account.
Open the battery cover on the back of the scale as
shown in the following picture, and then install the
batteries according to the polarity mark in the battery
case.
1. Download and set up the Application
4. Connect the scale with your phone
3. Weight unit conversion
or
moving life
Symbols of connection status:
Fail to be connected:
The symbol will be flashing
；
Succeed to be connected:
The symbol will be on constantly
.
Smart Body Fat Scale
Bonded device
A. Go to the “App Store” or “Google Play”, and search
“Moving life” to download the Application.
B. Or in another most convenient way by scanning the
QR code below
Note about the compatibility:
● iOS 7.0 or above
Android 4.3 or above
Bluetooth 4.0 or above
● Due to the technology of Bluetooth 4.0 LE, there is no
need to pair the smart device in Bluetooth setting, it
will be bonded automatically after bonding with the
App within the Bluetooth signal coverage of 5~10 meters.
● Compatible devices tested: iPhone4s or later, Nexus 5,
Nexus 6p, Samsung Galaxy S4, HTC One, Huawei Honor 6,
Xiaomi 5, Meizu MX3, LG G2 pro , etc. This App is not
optimized for tablet.
You will find the unit conversion button at the bottom
of scale, press or pull it to convert the weight unit, you
will see it changed on LCD.
For the first measurement, keep the scale connected
with the App, then put it on a solid and flat floor, and
step on it for the measurement. Once the weight is
stable and flashing, fat measurement will be proceeded.
You will review your weight and body fat display on the
screen for several time, then the scale will be off
automatically.
● Do not put the scale on a carpet or other soft surface,
it will lead to a wrong weight measurement.
● The first measurement has to be taken with Bluetooth
connection, the first weight data will be reference for
next auto user recognition.
● To make a proper measurement of body fat, please
keep your bare feet on the electrodes of scale. The
scale platform should be clean and dry.
● If you want to review all measurement data, open the
App, and check them in detail interface.
Warning indications
8 accounts can be connected with a scale.
Multiple users supported
Fat Measuring
Fat measurement is in process,
please don't step off the scale,
and make sure your bare feet is
touching with the electrodes.
Low Fat% Indication
The Fat% is too low. Please lead
a morenutritional diet and take
good care of yourself.
High Fat% Indication
The Fat% is too high. Please
watch your diet and do more
exercise.
Over-load Indication
The weighing subject on the
platform exceeds the maximum
capability of scale.Please step
off to avoid damage.
Calibration
Error exists, please re-test to get
the correct result.
Low Battery Indication
The battery power is running low,
please replace with a new battery.
可支持 8 个手机用户绑定使用，每个用户最多能离线
存储 15 组历史数据。
部分产品无显示连接状态符号，具体请以实物为准。
