MSD SECTOR Image 2400, Инструкция по эксплуатации инструмента

Страница: 13 / 56

Important Information 13
WARNING: Use of controls, or adjustment or performance of procedures other than those specified herein, may result in
hazardous radiation exposure.
2.2.4
Mechanical
WARNING: The SECTOR Imager 6000 weighs 150 lbs (68 kg) and the SECTOR Imager 2400/2400A weighs 140 lbs (64
kg). Be careful to use proper technique when lifting it to minimize the risk of injury. Two or more people should lift from beneath
the instrument. Please contact MSD
Instrument Service before attempting to move the instrument.
WARNING: The SECTOR Imager presents potential mechanical hazards. To avoid injury, do not touch any part of the
instrument while it is in operation. Do not place fingers in stack tubes or the plate carrier when the instrument is in operation.
Labels are affixed to the stack tube platforms indicating a pinch hazard.
CAUTION: When using robotic plate loaders (robots), ensure that there is nothing present that will obstruct robot
movement.
WARNING: Moving parts of the SECTOR Imager can be damaged or become misaligned when exposed to strong
mechanical force. As with any mechanical instrument, you should take certain precautions when operating the SECTOR Imager:
• Do not wear loose garments or jewelry that could catch in moving mechanisms.
•
Operate the instrument with the cover intact.
• Keep hands away from pathways of moving parts during operation.
• Do not attempt mechanical repair.
• Do not bump into or lean on the SECTOR Imager, or place any objects on top of it.
• Never operate the instrument unless both stacker ports contain a single plate adaptor ( Figure 3:5 ), a stack tube
( Figure 3:4 ), or the stacker cover plate ( Figure 3:5 ).
2.2.5
ESD Sensitivity
The SECTOR Imager has been tested for electrostatic discharge (ESD) sensitivity and complies with the applicable international
standards. Standard installation precautions should be taken when stationing the instrument for regular use. Like many instruments of
its kind, the SECTOR Imager is sensitive to static discharge in excess of 4.0 kV. In typical laboratory environments, electrostatic
discharge should not be a problem.
2.2.6
Electromagnetic Interference and Susceptibility
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference, in which case users will be required to correct the interference at their
own expense.
Changes or modifications not expressly approved by MSD may void the warranty. The operator shall use any special accessories
provided with the equipment such as the power supply or shielded cables that are necessary for compliance with FCC standards.
CAUTION: SECTOR Imager 6000 and SECTOR Imager 2400/2400A instruments have been tested for operation in a
controlled electromagnetic environment. Transmitters of RF energy such as mobile (cellular) telephones should not be used in
close proximity.