MSD SECTOR Image 2400, Инструкция по эксплуатации инструмента

Страница: 21 / 56

System Description 21
3.5.7
Stacker Cover Plate
The stacker cover plate ( Figure 3:5 left side of image) is used to cover the output (left) stacker interface when the machine is set to
return single plates to the input side. Both stacker interface plates should be covered when the machine is not in use.
The SECTOR Imager 2400A comes preconfigured to return plates to the input side. A stacker cover plate is preinstalled on the output
port.
Figure 3:5 SECTOR Imager plate in single plate adaptor

A stacker cover plate should always be in place when no stack tube or single plate adaptor is present.
3.5.8
Status LEDs
The status LEDs built into the camera tower indicate the current operational mode of the SECTOR Imager ( Figure 3:6 ).
• Steady blue: Instrument is in standby mode
• Blinking blue: Instrument is currently reading a plate
• Steady red: Instrument is in fault mode or is waiting for the addition of plates