MSA AirHawk MMR Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

MSA AirHawk MMR Скачать руководство пользователя страница 6

DESCRIPTION

CARRIER AND HARNESS

The carrier consists of a backplate, a cylinder strap with
buckle to hold the cylinder, and a harness, consisting of
shoulder straps, chest strap (optional), adjustable pull-
straps waist-strap, shoulder pads (optional) and belt
mounted regulator retainer.

LUMBAR PAD (OPTIONAL)

The lumbar pad with a flared design is designed to pro-
vide a cushion between the wearer and harness. The
flared design evenly distributes cylinder weight across the
wearer’s hips.

FACEPIECE

The facepiece is available in three sizes.

Only Ultra Elite Hycar facepieces (model numbers 7-935-
7, 7-935-8, and 7-935-9) have been tested against and
meet CBRN live agent test requirements.

Silicone face-

pieces are NOT CBRN-approved.

The facepiece has a low-resistance, pressure-demand
exhalation valve designed for easy cleaning. An inhalation
check valve in the inlet housing keeps moisture and cont-
aminants out of the mask mounted regulator. The face-
piece has a speaking diaphragm for clear, short-range
communication.

6

TAL 5010 (L) Rev. 3 - 10037469

«
...
4
5
6
7
8
...
»

Содержание AirHawk MMR

























Отзывы:

Нет отзывов