mru AMPROplus, Руководство пользователя

Страница: 41 / 100

USER MANUAL AMPRO plus
MRU GmbH, D-74172 Neckarsulm 41 / 100
Insert the probe pipe slowly into the stack and position your probe pipe
when you have reached the maximum flue gas temperature that is dis-
played.
Maximum temperature has been reached when the arrows (left picture) dis-
appear, max. (Right picture) appears in place of the arrow, and the beeper
signal stops. Moving away from the max. Temperature will result in the bars
moving away from the max. Once the right core flow has been achieved, the
probe is fixed with the probe cone screw.
Select Measurement program
NOTE
Wrong measuring results
The extracted flue gas must be able to evacuate the analyser
without obstruction.
►
The exhaust outlet at the rear of the analyser may never
be covered during a measurement, never operate the an-
alyser in a transport case.
DANGER
Rick due to toxic gases
There is a risk of poisoning.
Noxious gases are sucked in by the measuring device and
released into the ambient air.
►
Only use the measuring device in well ventilated spaces.