mru AMPROplus, Руководство пользователя

Страница: 87 / 100

USER MANUAL AMPRO plus
MRU GmbH, D-74172 Neckarsulm 87 / 100
15 Option: Auto-measurement
With the automatic measurement option, the analyzer can log continuous
measurements independently. You can largely adapt the properties of the
automatic measurement to your individual requirements. The data is stored
in the internal data memory and can then be transferred to the SD card.
As the size of the data memory is limited, the ratio between total duration
and interval is also subject to certain limits if the automatic measuring sys-
tem is to store values in the data memory. The analyzer displays the required
memory.
If the required memory is too high, reduce the measurement duration or in-
crease the interval to minimize the required memory.
If there is not enough free memory available, delete the measuring data
memory.
When starting a measurement, the Auto-measurement is switched off in
principle. You must consciously activate the Auto-measurement via the
menu key.
►
Start a gas measurement.

See also chapter 7.1Perform Gas measurement, Page 40.
►
Press the menu key.

A selection list appears.
►
Select Auto-measurement.
►
Press OK.

The menu Auto-measurement appears.
►
Set the desired values and select the desired site.
NOTE
Setting Average values:
Yes: Analyzer calculates the mean during each interval and
stores this value.