mru AMPROplus, Руководство пользователя

Страница: 27 / 100

USER MANUAL AMPRO plus
MRU GmbH, D-74172 Neckarsulm 27 / 100
In the menu "Measurement settings" menu you can make the following cus-
tomizations:
Setting Range Description
Temperature unit °C, °F Select temperature unit
Diff. press. unit hPa/Pa, hPa, kPa/Pa,
kPa, mbar, mmH2O,
cmH20, inchH2O, mmHG,
inHg, PSI, bar,
MPa, Pa Select pressure unit
Draft unit hPa/Pa, hPa, kPa/Pa, kPa,
mbar, mmH20, cmH20,
inchH20, mmHG, inHG, PSI,
bar, MPa, Pa, Select draft unit
Unit for P-abs. hPa, KPa/Pa, kPa, mbar,
mH2O,
cmH2O, inchH2O, mmHG,
inHG, PSI, bar,MPa, Pa Select unit for P-abs.
Mass flow mg/s,lb/yr,Tpy, Select unit for Mass flow
Unit density mg/m
3
, grain/ft
3
Select Unit density
Mass/Energy mg/MJ, lb/MMBtu Select unit for Mass/ Energy
Mass/Capacity mg/kWh, g/bhp-hr Select unit for Mass/Capacity
Factor NO zu NOx 1.00 – 2.00 Enter factor for conversion
from NO to NOx.
O2 resolution 0.1%, 0.01% Enter value for O2 resolution
Core flow search ON / OFF Core flow search before start of
each gas measurement: acti-
vated or deactivated
Add soot&T-boiler ON / OFF Add soot and T-boiler after
each gas measurement:
activated or deactivated
Annular -gap test ON / OFF Annular gap test:
activated or deactivated
Combustion calculation ON / OFF
If the combustion calculation is
switched off following items
will be changed:
- no fuel types, respectively al-
ways "Sample Gas"
- no measuring values losses,
ETA, ETAcond, Dev. point
- no measuring value CO2, ex-
cept it will be measured
- no measuring values
CO/NO/,,,. in
[mg/kWh]/[mg/MJ]
- no fuel type will be shown on
the menu bar and print-out