MRMC SFH-50, Быстрый старт

Страница: 7 / 40

SFH-50 Quick Start Guide
3
2. Adjust the height of the camera platform relative to the head, so that
the camera lens will be at the same height as the Tilt axis (and
centred in the optional Roll Ring) when the camera is mounted later.
Do not adjust the platform height when a camera is mounted.
To adjust the height on an SFH-50 with a Support Arm, loosen the
five retaining bolts that hold the camera platform in place (one on
the Support Arm, then four on the main platform arm), turn the
two height adjustment bolts to achieve the platform height you
want, then re-tighten the five retaining bolts.
Hint
If your SFH-50 has a Roll Ring and you use under-slung
mounting, move the camera platform to the bottom
(lowermost) position by manually rotating the Roll Ring 180°.
Do not move the camera platform to the bottom by inverting
the Tilt, as doing this will twist the Roll motor cable that goes
through the Tilt axle.
Loosen
Loosen
Platform
Loosen this one first,
tighten last Height adjustment bolts
Tilt axis
Support Arm
Platform