MRMC MILO MRMC-1100-00, Быстрый старт

Страница: 16 / 44

Milo Quick Start Guide
12
2. Tighten the 4 x grub screws using a 6mm allen key (turn
anticlockwise) on front and rear of the belt box to secure the lift
ballscrew.
Note
The tape on the Lift Ballscrews is used to keep the ballscrew in place
and prevents it from moving down by gravity. This helps with proper
alignment of the Lift Ballscrew when mounting on the turret and
therefore should not be removed until the Lift Ballscrews are
mounted. It is advisable to use a similar method to keep the
ballscrew from moving should you need to disassemble the Milo.
Tape used to hold
the ballscrew in
place
2