Page 13
Operating Instructions
mrcool.com
Manual Operation (without remote)
Units are equipped with a button to run emergency operation mode or for testing purposes. This
button is used for manual operation in case the remote control fails, or maintenance is necessary.
Please do not use this function unless it is absolutely necessary. An example of acceptable use
would be if the remote control was lost. The button can be accessed by opening the front panel,
however, the unit must be turned off before the manual operation function can be used.
CAUTION
Manual Control Button
To operate your unit manually:
1.
Open the front panel of the indoor unit.
2.
Locate the
MANUAL CONTROL button
on
the right-hand side of the unit. Please refer to the
image below.
3.
Pressing the
MANUAL CONTROL button
once will activate
FORCED AUTO
mode. Pressing
it again will activate the
FORCED COOLING
mode. Pressing the button a third time will turn
the unit off.
4.
Close the front panel.
