Page 12
Operating Instructions
mrcool.com
Range
Fig. 2.3
Horizontal Louver
Grill inside)
Vertical
Louver
Range
Fig. 2.2
Horizontal
CAUTION
DO NOT
the blower and suction side. The high speed fan
inside may cause injury.
DO NOT
operate the unit for long periods of time
in
COOL
or
DRY
mode with the airflow
direction of
the louver set at an extreme vertical angle. This
could cause condensation to form on the surface
of the vertical louver and allow moisture to drop
onto furnishings or the floor.
NOTE: When using COOL or HEAT mode, setting
the louver at an extreme vertical angle can
inhibit the performance of the unit because it
will restrict airflow.
DO NOT
move the vertical louver manually, as this
could cause it to become out of sync. If this
occurs, follow these steps:
1. Turn off power to the unit.
2. Unplug the unit from the wall outlet.
3. Wait a few seconds and plug the unit back in
and turn it on.
4. This will reset the louver.
NOTE: After a quick restart, the vertical louver may
remain static for approximately 10 seconds.
·
·
·
Louver
Adjustment of the vertical and horizontal
louvers will change airflow direction of
the indoor unit to prevent discomfort
and/or uneven room temperatures.
Adjust Vertical Airflow (Up/Down) using Vertical
Louver (Fig 2.2):
This function is performed by using the remote control
and pressing the
SWING/DIRECT
button while the unit
is operating. Please refer to the “
Remote Control User
Manual
” for further details.
Adjust Horizontal Airflow (Left/Right) using
Horizontal Louver (Fig 2.3 & Fig 2.4)
Move the deflector rod, located on the underside of the
unit, by pushing the tab to manually adjust the airflow
from side to side as desired. For some units, the hori-
zontal angle of the airflow can be set using the remote
control. Please refer to the
Remote Control Manual.
Fig. 2.4
