DIY
®
E-Star™ Remote Controller
4
Page 12
mrcool.com
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how
to operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
Buttons and Functions
ON/OFF
Turns the unit on or off.
SET
FAN SPEED
SWING
Increases temperature in
1°F (1°C) increments.
Maximum Temperature
setting is 86°F (30°C).
Scrolls through operation
functions in following
sequence:
Sleep
( )
Follow Me
( )
AP Mode
( )
The selected symbol will
flash on the display window,
press the
OK
button to
confirm.
Decreases temperature
in 1°F (1°C) increments
Minimum temperature
setting is 62°F (17°C).
TEMP
TEMP
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Selects fan speeds in the
following sequence:
AUTO LOW MED HIGH
NOTE: Pressing and holding
this button for 2 seconds
will activate the SILENCE
feature.
CLEAN
LED
TURBO
ECO
Enables unit to reach the preset
temperature in the shortest possible
time.
Used to start/stop the Self-Clean
function.
Turns the indoor unit’s LED display
and air conditioner buzzer on and off
(model dependent), to create a quiet
environment.
Press this button to enter the energy
efficient mode.
OK
Used to confirm the selected
functions.
TIMER
Used to set the timer to turn the unit
on or off at a specified time.
MODE
Scrolls through operation modes in
the following sequence:
AUTO COOL DRY HEAT FAN
NOTE: HEAT mode is not supported
by the cooling-only version.
SHORTCUT
Used to restore the current settings
or resume previous settings.
NOTE: Press and hold the temperature & buttons at the same time for 3 seconds and it will
alternate the temperature display between °F and
C
° readings.
