How To Use Advanced Functions
Page 9
mrcool.com
ECO/GEAR function
Under
COOL
mode, press this button and the remote controller will automatically adjust the
temperature to 75°F (24°C), fan speed off of
AUTO
to save energy. However, this only occurs when
the set temperature is less than 75°F (24°C). If the set temperature is above 75°F (24°C), pressing the
ECO
button will cause the fan speed to change to
AUTO
and the set temperature will remain
unchanged.
NOTE:
• Pressing the ECO/GEAR button, modifying the mode, or adjusting the set temperature to
less than 75
°
F (24°C), will stop ECO operation.
• Under ECO operation, the set temperature should be 75°F (24°C) or above, or it may result in
insufficient cooling. If the cooling feels insufficient, press the ECO button again to turn off
this feature.
Pressing the
iECO/GEAR
button will allow you to select the energy efficiency
modes in the following sequence:
ECO GEAR (75%) GEAR (50%) Previous setting mode ECO......
NOTE: This function is only available under the COOL mode.
ECO operation:
GEAR operation:
Press the
ECO/GEAR
button to enter the
GEAR
operation as following:
75% (up to 75% electrical energy consumption)
50% (up to 50% electrical energy consumption)
Previous setting mode.
Under
GEAR
operation, the display on the remote controller will alternate between electrical energy
consumption reading and the set temperature.
Pressing the
FAN
button for more than 2 seconds will activate or disable the Silence
function (some units).
Due to low frequency operation of compressor, this function could result in
insufficient cooling and heating capacity. Pressing the
ON/OFF
,
MODE
,
SLEEP
,
TURBO
or
CLEAN
button while the system is operating with the silence function activated will
cancel it.
Silence function
2s
