How To Use Advanced Functions
Page 10
mrcool.com
FP function
LOCK function
Clean
5s
5s
Turbo
Using this function will cause the unit to operate with a high fan speed setting
(while the compressor is on) with temperature automatically set to the lowest
setting, 46°F (8°C), in order to achieve faster cooling.
2
+
Pressing the
CLEAN
and
TURBO
buttons at the same time for
more than 5 seconds will activate the
LOCK
function.
With this feature activated no buttons pressed will respond,
except when these two buttons are pressed again for two
seconds in order to disable the
LOCK
function.
Press the button 2 times within one second while in HEAT Mode and the temperature will be set to
60°F (16°C) or 68°F (20°C) (dependent on model) and the FP function will be activated.
Pressing the On/Off, Sleep, Mode, Fan or Temperature buttons while operating this function will
cancel it.
NOTE: The function listed below is for heat pump air conditioners only.
Press
CLEAN
button
Airborne bacteria can grow in the moisture that condenses around heat
exchanger in the unit. With regular use, most of this moisture is evaporated
from the unit. By pressing the
CLEAN
button, your unit will clean itself
automatically. After cleaning has been completed, the unit will turn off
automatically. Pressing the
CLEAN
button mid-cycle will cancel the operation
and turn off the unit. You can use the
CLEAN
function as often as you like.
NOTE: You can only activate this function in COOL or DRY mode.
Clean
Clean Function (some units)
Press
TURBO
button
Turbo
When the TURBO button is pressed while the unit is in COOL mode,
the
unit will blow cool air with highest fan setting to speed up the cooling process.
When the TURBO button is pressed while the unit is in HEAT mode,
for
units with electric heat elements, the electric heater will activate and speed up
the heating process.
TURBO Function
