MRC EQ Limit, Руководство пользователя

Страница: 17 / 53

MRC AUDIO EQ
Limit
17
After connecting the corresponding USB cable between the PC and the limiter, in the
Installations window, click on the
Connect button and wait while the SCL finds the limiter.
The log window shows the connecting process.
Once the limiter is connected to the control software, if the firmware version of the equipment
is earlier than the one you are using in the SCL, a flashing warning appears offering the
possibility of updating your equipment.
If you do not want to update at this time, you can press the "Edit Limiter" button and continue
normally with the current version.
If you choose to update, it gives you the opportunity to confirm that update or postpone it to
another time.
If you choose the
Later option, you usually continue with the connection process. If you confirm
the update by pressing Yes , the update process begins.
NOTICE: the update action is of your entire responsibility. It takes a time to transfer the
update file to the limiter, in this time the limiter must not be disconnected from the PC.
If the action fails for any reason, the limiter will have to go back to the manufacturer in
order to burn the entire firmware into the limiter’s microprocessor.
PROGRAMMING
7