MRC EQ Limit, Руководство пользователя

Страница: 50 / 53

MRC AUDIO EQ
Limit
50
RED when starting, when an alarm occurs, or when the work period ends and therefore the
limiter ducks completelythe sound.
At switch on, the remote display reproduces a verifying sequence showing a count down from
9 to 0 at the four digits and lighting up all the LEDs. At the end of the countdown it starts
displaying the sound level and the LEDs show the state of the limiter.
Other messages displayed are:
-
If at a time of the day outside the working time configured in the Levels window, the
remote display shows the actual time of the day and the message StOP alternatively.
-
If the actual date and time are inside a special period, the remote display shows the
message SPEC and the sound level alternatively.
-
If there is a situation of alarm the remote display shows the message ALAr and the
sound level alternatively.
-
If the sound level measured by the microphone is under the configured minimum level
for registering level events, as described in previous chapters, the remote display shows
the message
Und .
-
When updating the 4 segments travel upwards - - - -
-
If the communication with the limiter fails, it shows no DAtA
In the Décret 2017-2144 mode, in the lower displays we can see, on the left, the measured level of
LeqA and on the right the LeqC, with a time of 15 minutes as requested by the decree.
If we want to use it to measure other parameters, we can choose them, according to fig. 4, selecting
the corresponding box for each of the two lower displays.