MPMan MP-F60, Руководство пользователя

Страница: 13 / 27

24 23
3.Setting the USB Controller in CMOS BIOS
If your system does not detect automatically the MPMan player when you connected the
player with the USB cable, you should check the CMOS BIOS whether or not the USB
related item was enabled. If the USB related item like USB controller was not enabled, the
system may not detect such a USB device automatically.
There are many types and versions of CMOS BIOS depending on the PC. Thus only
limited information will be explained here
1. How to get in the CMOS BOIS.
As soon as rebooting the system, press the ÒDELÓ, ÒF2Ó, ÒESCÓ or other key as it was
displayed on the monitor to run the CMOS BIOS Setup Utility.
T
Note :
If the Windows logo is displayed, you are too late to get in the CMOS BIOS setup utility.
You must reboot the system again.
2. Checking the Award Modular BIOS 4.51PGM.
Award Modular BIOS 4.51PGM. is one of the Award BIOS releases. From the Main screen,
you can see the ÒPNP/PCI ConfigurationÓ. Select this item. Check if the ÒAssign IRQ for
USBÓ item is set to ÒEnabledÓ and ÒPNP OS InstalledÓ is set to ÒYesÓ.
T
Note :
Please note that depending on the Award BIOS version, checking the USB related item is
different from the above description.
3. Checking the PhoenixBIOS Setup
From the Menu bar, select the ÒAdvancedÓ menu item. Set the ÒPlug & Play O/SÓ item is
set to ÒYesÓ since you are using a Plug & Play capable Operating System. Select the
ÒAdvanced Chipset ControlÓ item. Then set the ÒUSB ControllerÓ item to ÒEnabledÓ.
T
Note :
Please note that depending on the PhonenixBIOS version, checking the USB related item is
different from the above description.
If you are having a problem with setting the USB related item enabled, please contact
your Motherboard vender.
4.Connecting MPMan Player to PC
Following describes how to connect the MPMan player to the USB port of your PC.
1. There are two different connectors in both ends of the USB cable.
Connect one end of the cable (Type A) to a USB Port of your PC.
2. Connect the other end of the cable (Type B) to the USB port of the MPMan player.
T
Note:
If the MPMan Player is connected to the PC at the first time, the PC automatically detects
the player as a USB device.
For installation, please refer to the first section of the chapter.
Type A
Type B
*mp-man MP-F60¿ „fi 01.7.4 11:37 AM ˘ ` 23