MPMan MP-F60, Руководство пользователя, Страница: 22 / 27

Selecting FM Stereo / Mono
If you press the ÒMODEÓ button for longer than one second, the DISPLAY part will be
converted to the ÒSTEREOÓ (or ÒMONOÓ) state.
When you listen to FM broadcasting at a location where the receive sensitivity is poor,
the noise (static) could be severe and you may not get full stereo effects. When this is
the case, we advise that you switch to MONO to reduce noise levels, which will allow
you to listen to clear broadcasting although this means you cannot get the stereo
reception.
Setting an FM Frequency Band Mode
When you take an overseas trip, set up the frequency of each country as follows.
If you wish to change an FM frequency band mode, press and hold the ÒRECÓ button
for 3 seconds or longer in the ÒFM Preset Mode.Ó Each time you press the ÒRECÓ
button momentarily, the country mode will change as follows: Korea Band Japan
Band Europe Band World Wide Band
T
Caution:
Once an FM frequency mode is changed, previously stored PRESET information will
be lost.
42 41
2. Storing searched FM frequencies
After locating a frequency, press the ÒRECÓ button. When it asks if you wish to save
it, press the ÒRECÓ button again to confirm. (ÒYESÓ)
¥ The storing is done in ascending order in the FM Preset
Mode. It will be convenient if you search and store your
favorite frequencies.
¥ The number of frequency can be saved up to 20.
Listening to music after moving to the stored frequency
When you press the ÒFUNCÓ button, you will be
switched to the ÒFM Preset Mode.Ó
After moving through channels by using the ,
button, listen to the radio by using the button.
Pressing the ÒMODEÓ button from the ÒFM Preset
ModeÓ will go back to theÓFM Tuning ModeÓ.
¥ FM Tuning Mode : a mode where you can search or store your favorite frequencies.
¥ FM Preset Mode : a mode where you can conveniently select and listen to the
previously stored channel.
Deleting stored frequencies
In FM Preset Mode, select the channel to be erased with , button. If you press the
ÒERASEÓ button two times shortly, the LCD Display Window will show the message asking for
Erase. At this time, press the ÒERASEÓ button once again.
Range
87.50MHz ~ 108MHz
76MHz ~ 90MHz
87.50MHz ~ 108MHz
76MHz ~ 108MHz
Step
100kHz
100kHz
50kHz
50kHz
Country
Korea Mode
Japan Mode
Europe Mode
Worldwide Mode
*mp-man MP-F60¿ „fi 01.7.4 11:42 AM ˘ ` 41