MPMan MP-F60, Руководство пользователя, Страница: 6 / 27

7.SmartMedia Card Installation
If the flash memory in the player is not enough, you may use a SmartMedia card to store
more mp3 files.
Inserting a SmartMedia Card
As shown on the back of the player,
insert the SmartMedia card into the
slot toward the arrow direction. Make
sure the cutting edge matches to the
figure on the back of the player. Also
make sure the card is properly inserted
If it is not, the SmartMedia card will
not be recognized.
Removing the SmartMedia Card
Slide the Eject knob on the back of the
player toward the arrow direction.
Then, the SmartMedia card will be
ejected.
T
Caution :
¥ The player has to be turned off before inserting or removing a SmartMedia card.
¥ After inserting a new Memory card, you have to refresh or initialize the card using the
MPMan Manager program.
T
Note : Information of SmartMedia Card
¥ SmartMedia card can be used to store not only MP3 files but also any data files such as
doc, gif, bmp, wav, etc.
¥ The MP3 files in the SmartMedia card can not be played back with other player due to the
security of copyright consideration.
¥ The track sequence in the SmartMedia card is set up later than the track sequence in the
flash memory.
9 10
6.Using the Battery Compartment & Battery Status
Inserting A battery
1. Push the battery cover out and then up to open the battery
cover.
2. Insert the battery into the slot in accordance with
positive and negative symbols matching those of the battery.
T
Note :
You may use any 1.5V AA size batteries. Use of an
alkaline battery is recommended for more enjoying
MPMan. You may also use a rechargeable AA size 1.2V
Ni-Ca or Ni-MH battery.
Battery Status
The following figure shows the battery status indicator.
The battery status indicator shows how much life remains on the player.
When the battery is at full strength, the battery shaped indicator is fully filled in. When the
battery supply is nearly empty, only the outline appears and blinks . This is the
sign that the battery life is almost over. You should replace the battery at this time.
T
Note : on dry cell battery
¥ Make sure that and marks are correctly aligned.
¥ DonÕt add heat to battery or donÕt disintegrate it to prevent electrical leakage and other
dangers.
¥ When not using the battery, remove it to prevent needless battery wear.
LCD Display Window will show
remaining memory.
43M :Remaining Built-in memory
12M :Remaining SmartMedia card
memory
00M will be shown when a
SmartMedia card is not detected.
*mp-man MP-F60¿ „fi 01.7.4 11:35 AM ˘ ` 9