mpec SA380-IT, Руководство пользователя

Страница: 39 / 74

Green Software failure. Software failure. Normal Operation. Restart device if
steady on or steady
off. Remove from
service if fault persists.
Red
Safety Interlocks have
detected a device fault,
or earth loop
resistance is above
alert threshold. No hardware fault,
earth loop resistance
within tolerable range. NA See section 5. (Fault
Finding) if lit.
Red
One or more of the
monitored circuits is
presently
the below
configured alert
threshold.
All monitored circuits
are presently safely ab
the configured ove
alert threshold.
NA Remedial action
required to monitored
circuits if lit.
Green A data session is in
progress with another
device on the serial
port No data connection is
configured for the
serial port A data connection has
been configured,
however the device is
unable to converse. Check serial
connection, live status
and serial settings if
pulsating.
The volt-free contact output will be open when either or are lit. HW FAULT EARTH FAULT
The label on the front of the SA380-IT is for recording useful information about the product:
1 Site Name Write the unique name of the device here
such that it matches that of the device
configuration.
2 IP Address Write the devices IP address Ethernet
here. This is to ease on-site connection via
an Apple iDevice or Computer.
3 SIM Serial No. Fitted at factory.
4 SA380-IT Serial No. Assigned at factory.
4.3) Connecting the SA380-IT with a Computer or Apple device
4.3.1 Connect to a Computer directly using an Ethernet Cable
Connect Ethernet Cable.