MP Aquinity 2 E, Руководство по обслуживанию

Страница: 67 / 107

Service setup
Page 62
dbl_sec_q1_out_error 1800 30 mins Q1 problem -> STOP
dbl_sec_q2_out_error 1800 Q2 is out of range (30 min) STOP
dbl_sec_q3_out_error 1800 Q3 < 0.045µS (30 mins) -> STOP
dbl_sec_q3_out_warning 180 Q3 > limit (3 mins) -> WARN
dbl_sec_release_pressure 8 Time to release pressure (8 sec)
dbl_sec_upw_desinf_sv6_close 10 SV6 close for (10 s) by disinfection
dbl_sec_upw_desinf_sv6_open 10 SV6 open for (10 s) by disinfection
dbl_sec_venting_upw 30 30 secs venting UPW
dbl_sec_venting_upw_sv6_close 5 Venting PW -> SV6 close (5 sec)
dbl_sec_venting_upw_sv6_open 5 Venting PW -> SV6 open (5 sec)
dbl_t3_limit_warning 40 T3 max. -> show Warning
dbl_t3_limit_warning_exit 38 T3 -> exit Warning
dbl_tank_level_desinf 70 minimal Tank (%) to start disinfection
dbl_tank_level_min_dry 10 10% Tank level dry-protection
dbl_tank_level_min_init 50 Min (50%) Tank level for first start
dbl_tank_level_min_tap 15 Min (15%) Tank level for water tap
dbl_tank_level_tool 50 minimal (%) Tank to start UPW/UF tool
str_backup_calib_file \Had Disk\calib.mcf Path of calibration file backup
str_backup_config_file \Hard Disk\config.mcf Path of config file backup
str_backup_file_high_density \Hard Disk\data_high.dat Path of data high file backup
str_backup_file_low_density \Hard Disk\data_low.dat Path of data low file backup
str_backup_file_mid_density \Hard Disk\data_mid.dat Path of data mid file backup
str_backup_file_op_hour \Hard Disk\op_hour.dat Path of operating hour file backup
str_backup_log_file \Hard Disk\log_file.dat Path of logfile backup
str_first_start_device init_device_1 Default state of initial process
str_path_file_high_density \NandFlash\data_high.dat Path of data high file
str_path_file_low_density \NandFlash\data_low.dat Path of data low file
str_path_file_mid_density \NandFlash\data_mid.dat Path of data mid file
str_path_file_op_hour \NandFlash\op_hour.dat Path of operating hour file
str_path_log_file \NandFlash\logfile.dat Path of logfile
str_path_temp_file \NandFlash\temp.dat Path of temp file
str_standard_device aquinity Default state of normal process
str_tool_first_start tool_first_start Default state of first tool process
u16_mins_init_flush_ro 15 15 mins init FlushRO (AQ²P, AQ²P10)
u16_mins_init_flush_ro_edi 60 Init. FlushRO EDI for 60 mins (AQ²E)
u32_count_mins_desinfection 129600 Reminder of desinfection (3 Months)
u8_ai_bit_q1 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_q2 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_q3 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_q4 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_t2 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_t3 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_t4 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_bit_tank 0 0(12-bit), 1(14-bit), 2(16-bit), 3(18-bit)
u8_ai_port_q1 1 AI-port Q1
u8_ai_port_q2 3 AI-port Q2
u8_ai_port_q3 5 AI-port Q3
u8_ai_port_q4 7 AI-port Q4
u8_ai_port_t2 4 AI-port T2
u8_ai_port_t3 6 AI-port T3
u8_ai_port_t4 8 AI-port T4
u8_ai_port_tank 13 AI-port tank
u8_chart_sensor 0 Display sensors for Service
u8_chart_sensor_2 0 Display sensors for Customer