Moxa MXNVR-RO
Hardware Connection Description
3-8
Installing an Internal Storage Device
The MXNVR-RO-T computer comes with an internal storage tray that allows users to install a 2.5-inch SATA
storage device, such as a hard disk or a SSD drive. Take the following steps to install your storage device.
1.
Remove the 6 screws from the MXNVR-RO-T’s rear panel.
2.
Install the hard disk onto the internal storage kit. Connect the cable and the connector.
3.
Fasten the two screws on each side of the hard disk (total of four).
