Moxa Technologies MGate 5105-MB-EIP, Руководство пользователя

Страница: 52 / 57

MGate 5105-MB-EIP Web Console Configuration and Troubleshooting
4-3
Common Settings
Refer to the appropriate reference section in Chapter 3: MGate Manager Configuration of this user’s
manual for each MGate Manager settings page.
MGate Manager Settings Page Reference Section in Chapter 3
Basic Settings See Configure Device section
Network Settings See Network Settings section
Serial Settings See Serial Settings section
Protocol Settings - Protocol Conversion See Protocol Conversion section
Protocol Settings - EtherNet/IP See EtherNet/IP Settings section
Protocol Settings - Modbus RTU/ASCII See Modbus RTU/ASCII Settings section
Protocol Settings - Modbus TCP See Modbus TCP Settings section
System Management – Accessible IP List See Accessible IP Settings section
System Management – System Log Settings See Log Settings section
System Management – Auto Warning Settings See Auto Warning section
System Management – E-mail Alert See E-mail Alert section
System Management – SNMP Trap See SNMP Trap section
System Management – SNMP Agent See SNMP Agent section
System Management – LLDP Settings See LLDP Settings section
System Management – Misc. Settings See Misc. Settings section
System Management – Maintenance - Firmware Upgrade See Upgrade Firmware section
System Management – Maintenance - Configuration
Import/Export See Import/Export section
System Management – Maintenance - Load Factory
Default See Load Default section
In addition to the common settings above, the following functions mentioned in this chapter are only available
in the web console.
Protocol Settings
Protocol Settings – I/O Data Mapping
When selecting a command, the mapped internal memory will be highlighted as shown in the following figure.
This function is only available in the web console.