MGate 5105-MB-EIP
Introduction
1-7
EMC:
CE, FCC
EMI:
EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS:
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,(PFMF) Level 3
Shock:
IEC 60068-2-27
Freefall:
IEC 60068-2-32
Vibration:
IEC 60068-2-6
Reliability
MTBF (mean time between failures):
513,139 hrs
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty
Reset Button
Restore the MGate to factory default settings by using a pointed object (such as a straightened paper clip) to
hold the reset button down until the Ready LED stops blinking (approx. 5 seconds).
Pull-high, Pull-low, and Terminator for RS-485
Remove the MGate 5105-MB-EIP’s top cover and you will find DIP switches to adjust each serial port’s pull-high
resistor, pull-low resistor, and terminator.
SW 1
2
3
Pull-high
resistor
Pull-low
resistor
Terminator
ON 1 k
Ω
1 k
Ω
120
Ω
OFF 150 k
Ω
*
150 k
Ω
*
–*
*Default
microSD
The MGate 5105-MG-EIP provides user with an easy way to backup/copy/replacement/deployment. The MGate
are equipped with a microSD card slot. User can plug in a microSD card to backup data including the system
configuration setting, GSD files, and system data log.
First time using the MGate gateway with a new microSD card
1.
Format the microSD card as FAT file system through a PC.
2.
Power off the MGate and insert the microSD card (ensure that the microSD card is empty).
3.
Power on the MGate. The default settings will be copied to the microSD card.
