MGate 5105-MB-EIP
MGate Manager Configuration
3-6
Specify by IP Address
Specify by IP Address
is used for MGate Ethernet Gateways, such as the MGate 5000/MB3000/EIP300 series,
which are discovered via Ethernet by using a specific IP address. Click
Specify by IP Address
if you know the
IP address of the unit and wish to connect to it directly.
ATTENTION
If Search by IP Address fails to locate the MGate 5000/MB3000/EIP3000 series, the IP address that you
entered might be incorrect. Try doing the search again and re-entering the IP address carefully.
Another possibility is that the MGate 5000/MB3000/EIP300 series is located on the same LAN as your PC, but
on a different subnet. In this case, you can modify your PC’s IP address and or netmask so that it is on the same
subnet as the MGate 5000/MB3000/EIP300 series. After your PC and the MGate 5000/MB3000/EIP300 series
are on the same subnet, MGate Manager should be able to find the unit.
Modifying the Configuration
Once your unit is displayed in MGate Manager, select it by clicking on it. The Configuration button will become
available. Click
Configuration
to open the configuration window.
Password Protection
For safety reasons, account/password protection is enabled by default so you must provide the correct
password to unlock the device before configuring the device.
The default password is
moxa
in all lowercase letters.
