MGate 5105-MB-EIP
MGate Manager Configuration
3-24
Load Default
To clear all the settings on the unit, use the
Load Default
button to reset the unit to its initial factory default
values.
Click
Load Default
and review the confirmation message. If you are sure you would like to reset the
configuration to factory defaults, click the
OK
button. If not, click
Cancel
.
After the MGate Manager resets completely, MGate Manager will automatically execute a Broadcast Search for
all MGate units on the LAN. Your MGate should reappear in the list of units.
ATTENTION
Load Default
will completely reset the configuration of the unit, and all of the parameters you have saved will
be discarded. Do not use this function unless you are sure you want to completely reset your unit.
