MGate 5105-MB-EIP
MGate Manager Configuration
3-20
System Log Settings
These settings enable the MGate firmware to record important events for future verification. The recorded
information can only be displayed in the web console.
The available information that can be recorded includes the following events:
Parameters
Event
System
System Cold Start, System Warm Start
Network
DHCP/BOOTP Get IP/Renew, NTP Connect Fail, IP Conflict, Network Link Down
Configuration
Login Fail, IP Changed, Password Changed, Firmware Upgrade, SSL Certificate
Import, Configuration Import/Export
EtherNet/IP
EtherNet/IP Communication logs
Modbus TCP
Modbus TCP Communication logs
Users can view the recorded information from the web console or text mode console.
Auto Warning Settings
Auto Warning is triggered by different events. When a checked trigger condition occurs, the MGate can send
e-mail alters, SNMP Trap messages, or open/close the circuit of the relay output and trigger the Fault LED to
start blinking. To enable an e-mail alert, configure the e-mail address on the E-mail Alert page. Likewise, to
enable SNMP Trap alerts, configure SNMP trap server on the SNMP Trap page.
E-mail Alert Settings
