- 7 -
ATTENTION
To avoid environmental vibration or shock, you can consider a
robust installation with four bigger screws, which the shafts are
between 7.0 mm and 8.5 mm in diameter, and fix the
AWK-6232-M12 onto wall directly and tightly.
DIN-Rail Mounting (Optional)
The DK-DC50131 die-cast metal kit can be
bought separately, and enable easy and
robust installation for the AWK-6232-M12. A
pair of DK-DC50131s is needed for DIN-Rail
mounting. To install the DIN-Rail mounting
kits, tightly attach the two DIN-Rail
mounting kits on the rear panel of
AWK-6232-M12 with 12 screws. (6 screws
for each kit)
To Install
STEP 1:
Use the recessed button
on the spring-loaded
bracket to lock it into
position.
STEP 2:
Insert the top of the DIN-Rail into the slot
just below the upper hook of the DIN-Rail
mounting kit. Push the AWK-6232-M12
toward the DIN-Rail until the DIN-Rail
attachment bracket snaps into place.
To Release
STEP 1:
Pull out the two spring-loaded
brackets from the bottom until
they are fixed in the “release”
position.
STEP 2:
Pull the AWK-6232-M12 out and
upward.
