- 5 -
ATTENTION
Please DO NOT open or remove the vent (item
10
, in the
diagram). The warranty will be invalid if the seal is removed.
All exposed connectors, including items
1
,
2
,
&
4-7
, should be
tightly covered by suitable caps when they are not in use.
Dimensions (unit = mm)
Attaching Antennas
The AWK-6232-M12 inclues two dual-band omnidirectional antenna by
default. Attach the antennas as illustrated below.
Step 1:
Use your fingers and hold the antenna metal N-type connector.
Step 2:
Screw the antenna N-type connector (male) onto the
AWK-6232-M12 device’s N-type connector (female)
Caution
Do not hold the rubber plate to screw the antenna on to the
AWK-6232-M12 device.
Antenna Metal N-type
Rubber plate