Moxa Technologies airworks awk-5232 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 81

background image

AWK-5232

Web Console Configuration

3-32

Storm Protection

Setting

Description

Factory Default

Enable/Disable

Enable or disable Broadcast Storm Protection globally for
multicast packets

Enable

Multicast and flooding

Setting

Description

Factory Default

Enable/Disable

If you enable Storm Protection, the Multicast and flooding
option will show up. You can Enable or Disable Broadcast Storm
Protection globally for unknown multicast and unknown unicast
packets.

Disable

Link Fault Pass-Through (for Client/Slave mode only)

This function means if Ethernet port is link down, wireless connection will be forced to disconnect. Once
Ethernet link is recovered, AWK will try to connect to AP.

If wireless is disconnected, AWK restarts auto-negotiation on Ethernet port but always stays in the link failure
state. Once the wireless connection is recovered, AWK will try to recover the Ethernet link.

System log will indicate the link fault pass through events in addition to the original link up/down events.

Link Fault Pass-Through

Setting

Description

Factory Default

Enable

Enables Link Fault Pass-Through

Disable

Disable

Disables Link Fault Pass-Through

Auto Warning Settings

Since industrial-grade devices are often located at the endpoints of a system, these devices will not always
know what is happening elsewhere on the network. This means that these devices, including wireless APs or
clients, must provide system maintainers with real-time alarm messages. Even when system administrators
are out of the control room for an extended period, they can still be informed of the status of devices almost
instantaneously when exceptions occur.

In addition to logging these events, the AWK-5232 supports different approaches to warn engineers
automatically, such as SNMP trap, e-mail, and relay output. It also supports two digital inputs to integrate
sensors into your system to automate alarms by email and relay output.

System Log

System Log Event Types

Detail information for grouped events is shown in the following table. You can check the box for Enable log to
enable the grouped events. All default values are enabled (checked). The log for system events can be seen in
Status



System Log.

«
...
44
45
46
47
48
...
»

Содержание airworks awk-5232


















































































Отзывы:

Нет отзывов

Похожие инструкции для airworks awk-5232

Бренд: XDS Страницы: 99

Бренд: Patton electronics Страницы: 51

Бренд: Jabra Страницы: 15

MediaStream ConnectPlus 1000

Бренд: Avid Technology Страницы: 74

Бренд: NETGEAR Страницы: 2

Бренд: Measurement Computing Страницы: 27

Бренд: Qlogic Страницы: 2

Бренд: Genie Страницы: 15

Бренд: BSD Networks Страницы: 7

Бренд: Idis Страницы: 31

Бренд: ESD Страницы: 28

Бренд: Jøtul Страницы: 20

Бренд: TP-Link Страницы: 87

AirStation WZR-1166DHP

Бренд: Buffalo Страницы: 2

CNPS11X Extreme

Бренд: ZALMAN Страницы: 12

Бренд: Hama Страницы: 25

Бренд: Infoblox Страницы: 16

S3000-EI Series

Бренд: Quidway Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды