Moxa Technologies airworks awk-5232 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 81

background image

AWK-5232

References

6-2

Beacon

A beacon is a packet broadcast by the AP to keep the network synchronized. A beacon includes the wireless LAN
service area, the AP address, the Broadcast destination address, a time stamp, Delivery Traffic Indicator Maps
(DTIM), and the Traffic Indicator Message (TIM). Beacon Interval indicates the frequency interval of AP.

DTIM

Delivery Traffic Indication Map (DTIM) is contained in beacon frames. It is used to indicate that broadcast and
multicast frames buffered by the AP will be delivered shortly. Lower settings result in more efficient networking,
while preventing your PC from dropping into power-saving sleep mode. Higher settings allow your PC to enter
sleep mode, thus saving power.

Fragment

A lower setting means smaller packets, which will create more packets for each transmission. If you have
decreased this value and experience high packet error rates, you can increase it again, but it will likely decrease
overall network performance. Only minor modifications of this value are recommended.

RTS Threshold

RTS Threshold (256-2346) – This setting determines how large a packet can be before the Access Point
coordinates transmission and reception to ensure efficient communication. This value should remain at its
default setting of 2,346. When you encounter inconsistent data flow, only minor modifications are
recommended.

STP and RSTP

The STP/RSTP Concept

Spanning Tree Protocol (STP) was designed to help reduce link failures in a network, and provide protection
from loops. Networks that have a complicated architecture are prone to broadcast storms caused by
unintended loops in the network. The STP protocol is part of the IEEE802.1D standard, 1998 Edition bridge
specification.

Rapid Spanning Tree Protocol (RSTP) implements the Spanning Tree Algorithm and Protocol defined by
IEEE802.1w-2001 standard. RSTP provides the following benefits:

•

The topology of a bridged network will be determined much more quickly compared to STP.

•

RSTP is backward compatible with STP, making it relatively easy to deploy. For example:



Defaults to sending 802.1D-style BPDUs if packets with this format are received.



STP (802.1D) and RSTP (802.1w) can operate on the LAN ports and WLAN ports (AP and WDS1-WDS8)
of the same AWK-5232.

This feature is particularly helpful when the AWK-5232 connects to older equipment, such as legacy switches.

«
...
73
74
75
76
77
...
»

Содержание airworks awk-5232


















































































Отзывы:

Нет отзывов

Похожие инструкции для airworks awk-5232

HAWA-Frontside 60/B

Бренд: hawa Страницы: 28

APS6-400 Series

Бренд: Eaton Страницы: 114

Бренд: B&B Electronics Страницы: 2

PG-Flex FLC-704

Бренд: PairGain Страницы: 20

Бренд: ZALMAN Страницы: 16

Бренд: Meinberg Страницы: 14

Бренд: Uctronics Страницы: 2

Network Scanning Unit A

Бренд: Ricoh Страницы: 206

Бренд: EK-Quantum Страницы: 14

Бренд: National Instruments Страницы: 45

Бренд: Inter-m Страницы: 20

Core 2 Duo E4300

Бренд: Intel Страницы: 55

Бренд: Thecus Страницы: 90

Бренд: Alcatel Страницы: 158

Бренд: Jäger Страницы: 54

Бренд: iTON Страницы: 12

Бренд: Hanwha Vision Страницы: 131

Бренд: Acromag Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды