AWK-5232
Web Console Configuration
3-43
Password
You can change the administration password for each of the AWK-5232’s console managers by using the
Password function. Before you set up a new password, you must input the current password and reenter the
new password for confirmation. For your security, do not use the default password root, and remember to
change the administration password regularly.
Misc. Settings
Additional settings to help you manage your AWK-5232, are available on this page.
Reset button
Setting
Description
Factory Default
Always enable
The AWK-5232’s Reset button works normally.
Always enable
Disable after 60 sec
The AWK-5232’s Reset button will become invalid 60 seconds
after the AWK-5232 completes booting.
Save Configuration
The following figure shows how the AWK-5232 stores the setting changes into volatile and non-volatile memory.
All data stored in volatile memory will disappear when the AWK-5232 is shutdown or rebooted unless they are
y. Because the AWK-5232 starts up and initializes with the settings stored in flash memory, all new changes
must be saved to flash memory before restarting the AWK-5232.
This also means the new changes will not work unless you run either the Save Configuration function or the
Restart function.
