AirWorks AWK-3121 User’s Manual
Getting Started
2-4
After configuring the WLAN card, establish a wireless connection with the AWK-3121 and open a
DOS window on Notebook B. At the prompt, type
ping <IP address of notebook A>
and then press
Enter
(see the figure below). A “Reply from IP address …” response means the
communication was successful. A “Request timed out.” response means the communication failed.
In this case, recheck the configuration to make sure the connections are correct.
Testing Method for two or more AWK-3121s
If you have two or more AWK-3121s, you will need a second notebook computer (B) equipped
with an Ethernet port. Use the default settings for the first AWK-3121 connected to notebook A
and change the second or third AWK-3121 connected to notebook B to Client mode. Then,
configure the notebooks and AWK-3121s properly.
After setting up the testing environment, open a DOS window on notebook B. At the prompt, type
ping
<IP address of notebook A>
and then press
Enter
. A “Reply from IP address …” response means the communication was
successful. A “Request timed out” response means the communication failed. In this case, recheck
the configuration to make sure the connections are correct.
Function Guiding Map
The management functions are categorized in a tree and shown in the left field of the web-based
management console. You can efficiently locate the function you need with the following guiding
map.
