User manual LFX Master DMX
page 9 of 35
3.5 Transitions function
Use every type and size of
tungsten lamps or LED.
A result of an effect would look
different with the same signal
used at different lamp types/si-
zes, particularly if an LED lamp
is used.
“Transitions” adapts effects to
the duration of persistence of
various types of filaments or to
LED lamps.
The timing difference between the moment of electrical deactivation and the time of a com-
pletely extinguished light depends on the power of the bulb.
Choose the transition mode depending on the used type and size of lamp (bulb inertia).
Thus any lighting effect looks excellent – with a 10K, a redhead, a household type 60 W
bulb, fluoros or LED. The “Transitions” feature of the LFX Master DMX also modifies the
transitions between the channels
Also use “Transitions” for different styles of e.g. fire – from aggressive to smooth.
The Transition mode is automatically pre-selected if you turn rotary switch "EFFECT" to any
effect symbol. For Strobe effects "Transitions" is deactivated.
Depending on the manufacturer of the lamp a LED fixture might have different DMX input
signal pocessing. Some might "smooth" the signal, prefer to disable the "smooth" function.
3.6 mechanical mounting
Located on the rear bottom of the LFX
Master DMX there is a 1/4" thread.
Use a standard brass pin for mount-
ing, maximum length of the 1/4"
screw must not exceed 8 mm.
edition June 2018- en 2.0.1
www.movie-inter.com
Effect
Fire
Tungsten
60 W bulb
med
150-800 W
med
Candle
TV
Welding
"broken" tube
soft
med
med
hard
hard
hard
hard
hard
Strobe
-
-
LED
>1 kW
hard
"smooth" off
med
"smooth" ON
hard
hard
hard
soft
med
hard
hard
hard
hard
hard
hard
hard
hard
-
-
-
recommended settings for "Transistions"
