edition June 2018- en 2.0.1
www.movie-inter.com
User manual LFX Master DMX
page 6 of 35
Power supply unit
Exclusively use the external PSU (Power supply unit) for
operation, included in delivery.
Plug-in the mains connector to 100 - 240 VAC/ 50 to 60
Hz. Please replace the interchangeable adaptor plug for
EU, US, UK, AU.
Connect the round DC-plug to the LFX Master DMX´s
DC input 1 or 2.
Alternatively use a battery (5 - 32 VDC) with a round
standard 2.1mm power plug, center positive.
Or use the USB > Power cable to poeer ot up.
3.2 Pre-programmed effects
Natural looking lighting effects
The unit is equipped with six pre-programmed effect presets.
Obey safety instructions!
Each effect preset has a resolution of 24 fps at default values.
A coloured label on the control panel represents the recommended settings - set SPEED
and DIMMER min to the corresponding coloured markers located on each scale.
TRANSITIONS is set automatically to the recommended mode after selection of an effect.
preset name
fire
candle
TV
welding
"broken" fluoro
strobe
label
TV
!
application
hints
single channel fire FX or use three
lamps for fire with flickering shadows,
torche
a slidely flickering candle FX, oil lamp,
lantern
play with TRANSITIONS and DIM-
MER min, reduce DIMMER min if
used with three channels
choose a lamp with small light
omitting surface, e.g. house-
hold type 60 W bulb
flickering effect of a TV, RGB color
shifts if used in RGB mode of LED fix-
ture or with three lamps geled
effect of welding or a short-circuit
set CCT to about 6500 Kelvin,
set TRANSITIONS to "med"
with LED
LED: set CCT to about 6500
Kelvin or above, for tungsten:
small wattage (bulb inertia)
"broken" fluoro will not come on, fli-
ckering tube LFX for LED or tungsten
rectangle signal, neon signs, flasher,
stroboscope, turn indicator;
speed from 70 msec to 28 sec
let "tube" turn on live by turning
DIMMER min to 100% rapidly
use as sequencer with 3 chan-
nels
CH2 & 3, each has 33% delay
