User manual LFX Master DMX
page 27 of 35
6.3.3 DMX IN preset "full remote control"
This preset loads all required settings for remote control of the LFX Master DMX via DMX.
Remote control is disabled if switch "EFFECT" is on position "DMX set-up".
edition June 2018- en 2.0.1
www.movie-inter.com
LFX Master DMX
DMX IN
DMX OUT
DMX IN
DMX OUT
LED fixture 1
DMX line
Dimmer console
DMX OUT
set-up DMX IN
load preset
edit DMX channels
clear channels
3xOUT separate Dim
full remote control
optical sensor IN
expert mode
Expert mode DMX IN
address = function
001
= MAX OUT 1
002 = min OUT 1
003 = MAX OUT 2
004 = min OUT 2
005 = MAX OUT 3
006 = min OUT 3
007 = Effect
008 = Speed
009 = Transitions
add input channel
exit
dimmer console DMX Start address
Edit the DMX addresses and functions the same
way as done in the DMX OUT expert mode.
DMX Start Adress: 001
DMX Values for EFFECT
0 – 14% = OFF
15 – 29% = fire
30 – 35% = candle
36 – 51% = tv
52 – 68% = welding
69 – 84% = fluoro
85 -100% = strobe
DMX values for
TRANSITIONS
0 - 33% = hard
34 - 66% = med
67 -100% = soft
In remote control mode
knobs on LFX Master control
panel are disabled.
CH 1 2 3 4 5 6 7 8 9 10 11 12 Master
E S T
You need to add the "Enable"-
function manually. It´s not in-
clucded in this DMX IN preset.
> next page
Full remote control
LFX Master: 9 DMX
channels used help
001
= startaddress
ok
cancel
