edition June 2018- en 2.0.1
www.movie-inter.com
User manual LFX Master DMX
page 10 of 35
3.7 General set-up procedure
First of all choose the lamp(s) you would like to control.
Got through steps 1 to 3.
For control of tungsten lamps one or many externally connected DMX-512 based dimmer
packs are required.
LED fixtures normally does not require a dimmer pack and can be controlled directly.
Add as many LED devices as required using a device preset.
Chapter 4
Online configuration Tool
On
www.lfxmaster.com
you may configure any output setting using an arbitrary number of
lights.
Enter the type and number of lamps, the set-up assistant will guide you through the settings.
Finally e-mail this step-by-step guide to your account.
This web site is permanently updated with new LED fixtures and features.
1
2
3
Power up @ DC-input 5-32
VDC 1 or 2
Connect a DMX device @
DMX OUT
WARNING
Never connect two power
sources at the same time
using DC IN/OUT 1 and 2!
Turn "EFFECT" to position
"DMX set-up"
Set-up the DMX communi-
cation with one or many
lamps using DMX-OUT de-
vice presets or custom set-
up
Choose a device preset
or
use the custom configurati-
on
Turn "EFFECT" to any EF-
FECT position.
Start with the default set-
tings printed on the control
panel.
create lighting effect
Risk of fire!
We would be very pleased if you would inform us about the successful use of a light
not included in the DMX device list. We update the device list constantly - that helps
other users!
A contact link can be found on this website.
