User manual LFX Master DMX
page 28 of 35
edition June 2018- en 2.0.1
www.movie-inter.com
6.3.4 DMX IN "Enable"-function
This function adds a trigger function to the LFX Master DMX.
If the DMX value for this input channel is < 5% all DIM OUT channels will be disabled,
if the value is > 5% the selected effect will be used.
Most likely this function is added to the "full remote control" DMX IN preset. You may also
use the "Enable"-function without the "full remote control" DMX IN preset.
You may use this function to trigger e.g. a welding effect with just a single DMX channel.
1. Set rotary switch "EFFECT" to position "DMX set-up"
2. With JOG navigate to DMX IN > "edit DMX channels" >
Expert mode DMX IN
address = function
001 = MAX OUT 1
002 = min OUT 1
003 = MAX OUT 2
004 = min OUT 2
005 = MAX OUT 3
006 = min OUT 3
007 = Effect
008 = Speed
009 = Transitions
add input channel
exit
008 Speed
009 Transitions
010
Patch > 002
add input channel
008:Speed :
009:Transistions:
010>Enable <
add:Patch :
3.
4.
Click on "add input channel"
Click on " Patch"
change function to "Enable"
007 Effect
008 Speed
009 Transistions
010
Enable
if required change
the DMX channel here
5.
disabled
OUT
MAX:
1
100%
min:
25%
Speed
72%
2
82%
3
50%
37%
10%
"disabled" status shown on display
