Movacolor MC-BALANCE Скачать руководство пользователя страница 5

Страница: 5 / 49

MC-Balance manual

2. General information

2.1 Safety

The equipment is only designed and may only be used for the dosing of dry additives.

Any use that is not in conformity with the instructions is considered improper and as such
frees the manufacturer from any liability regarding damage to things and/or persons.

Before switching on the unit for the first time, ensure that the mains power voltage

applied is between 80 and 260Vac.

Always switch off the Movacolor control cabinet and disconnect the mains power plug from

electrical power before performing maintenance.

Ensure that all parts are securely fixed to the extruder or injection molding machine.

Dangerous voltages are present inside the control cabinet for up to 2 minutes after it has

been switched off.

2.2 Certification

The Movacolor dosing unit is designed and produced in conformity with the following European
regulations:

•

standards for machinery (health, safety, environment)

•

EMC (electromagnetic compatibility)

•

VEM (safety electric material)

•

98/37/EC, Annex 1(See the declaration of conformity, Appendix E)

2.3 Operating environmental conditions

•

The unit must be protected against weather conditions

•

Operating temperature -20 to +70 degr. C.

•

Protection class: IP-50

Содержание MC-BALANCE


















































Результаты поиска

Содержание MC-BALANCE

Отзывы:

Бренды по названию

Популярные бренды

Movacolor MC-BALANCE, Руководство пользователя

Результаты поиска

Содержание MC-BALANCE

Отзывы:

Бренды по названию

Популярные бренды