Moulinex bolognese HV2, Руководство пользователя

Страница: 15 / 65

9
KIBBEH BI LABAN (Kibbeh meatballs in yoghurt)
Serves 6 – Preparation time: 1 hr
Standing time: 1 hr in refrigerator
Ingredients for the kibbeh mixture:
600 g meat – 300 g bulgur (cracked
wheat) – salt Ingredients for the sauce:
1 kg yoghurt – 1 bunch of coriander
– 4 cloves of garlic – 3 tablespoon
cornflour – salt, pepper
1. Cut the meat into pieces. Fit the
4.7 mm disc onto the mincer.
Mince the meat, at the same
time adding the bulgur. Run the
mixture at least twice in the min-
cer until smooth. Add salt cover
with cling film and then leave the
mixture to chill in the refrigerator
for 1 hour.
2. Form the mixture into small balls.
3. To prepare the sauce: wash the
bunch of coriander, pat it dry
with kitchen paper and remove
the leaves. Peel and crush the
garlic. Brown the garlic and co-
riander leaves in a frying pan for
1 to 2 minutes on low heat. Set
aside.
4. Beat the yoghurt and cornflour
together and season with salt
and pepper. Pour the yoghurt
and corn flour mixture into a sau-
cepan through a fine sieve. Bring
the mixture to the boil and re-
duce the heat. Cook carefully,
stirring continuously so that the
yoghurt does not stick to the
pan.
5. Add the garlic and coriander.
Poach the kibbeh meatballs for
10 minutes.
COULIS ATTACHMENT (F)
Assembling the coulis attachment (diagrams 3.1 and 3.2)
This attachment enables you to
make coulis (red berries, tomatoes)
and juices (apples, pears, oranges,
etc.) Take the plastic screw F3 (hexa-
gon facing upwards) and place the
drive F2 into it (spring in the direction
of with the screw). Take the body F1 by the feeder tube,
placing the widest opening facing
downwards. Then introduce the drive
assembly (F2) – screw (F3) into it.
Place the filter F4 lining up the 2 lugs
with the 2 notches on the body F1.
Then position the nut F5 and screw
home.
Place the coulis attachment head,
with the feeder tube angled to the
right, opposite the unplugged motor
unit E.
Line up the 2 bayonets of the head
with the 2 notches on the motor unit.
Engage the head fully into the motor unit E and then turn the feeder tube
to the left until it reaches a stop (the
feeder tube should be vertical at this
point).
Engage the removable coulis collec-
tor F6 on the filter until it reaches a
stop. You can adjust the position of
Fitting the coulis attachment to the appliance (diagrams 3.3 and 3.4)
1520000783_NOTICE_HACHBOLOGNESE_moulinex_Mise en page 1 29/08/14 13:55 Page9