MOTU 828es, Руководство пользователя

Страница: 54 / 120

P R E S E T S
54
STAND-ALONE MIXER
Choose the Stand-alone mixer preset to use 828es
as a mixer. Doing so routes all physical inputs to
the mixer, with the mixer’s main mix bus goes to
the Main Outs and the monitor bus goes to the
Headphone Outs.
To control the mixer (with the web app), you have
several options. You can connect a computer to
the 828es using Thunderbolt, USB, Ethernet, or
Wi-Fi, as explained in “Setup for web app control”
on page 38. Figure 6-2 below shows the Wi-Fi
scenario. Note that you can control the mix from
multiple Wi-Fi devices.
Figure 6-2: Using the 828es as a stand-alone mixer. This example
demonstrates how you can control the mixer from several Wi-Fi
devices.
INT MIXER
Choose the Int Mixer preset to use the
828es as both an audio interface and mixer, simul-
taneously. This preset is identical to the
Audio
Interface preset, except that all From Computer
channels are also routed to the on-board mixer,
which mixes them to the Main Mix bus (to the
Main Outs) and the Monitor bus (to the
Headphone Outs). The on-board mixer mixes all
of the following sources:
■
The 828es analog inputs
■
The 828es optical inputs
■
All From Computer channels (Thunderbolt or
USB channels from the host computer)
The Monitor bus is set up as a solo bus.
In this scenario, you can control the mixer from
the MOTU Pro Audio Control web app running
on the computer. You can also run the web app
from wireless devices on the same Wi-Fi network
as the laptop.
Figure 6-3: Using the 828es as an audio interface and mixer, simultane-
ously.
Airport
or any other Wi-Fi router
Ethernet
cable
Wi-Fi devices
Laptop (optional) Tablet Smart
phone
Local inputs plus network inputs
Main
Mix
Aux
Mix
Group
Mix 1
Group
Mix 2
Laptop
Audio inputs from stage, studio, etc.
Main
Mix
Aux
Mix 1
Aux
Mix 2
OR