8. The unit performs poorly.
-Check all hoses and wires for cuts or frays.
-Check cabinet for dents or impact markings.
-Verify that the tank filter screen has recently been cleaned.
(Refer to the maintenance log in
Appendix A
to view dates of
services performed.)
9. When first connected to a battery, the
units lights all flash on and off, and
gives a steady tone.
-Verify good battery voltage (12.5 volts) and connection.
-Unit will not operate off a booster pack. Connect to a new fully
charged battery and try again.
10. Unit starts working normally, then all the
lights flash on and off and oil may come
out of waste hose or reverse directions
in service hose.
-Remove back panel, unsnap fluorescent lamp from clip. Follow
wires to connector and disconnect both wires to lamp. Reset
battery connection and start service over. If service works,
replace lamp.
ADDITIONAL HELP
Please verify that items above have been reviewed before calling
for additional assistance.
In the unlikely event that problems persist with the unit call
Technical Support, have your model and serial numbers available
before you call. Remember to send in your warranty card.
U.S.A Canada:
(800) 841-8810
Contact your local
(714) 558-4822
MotorVac distributor
