11.
Let engine run for one minute, then check the transmission’s fluid level.
If level is low:
a)
When complete light is on, and the low clean fluid light is on: Press and hold the FILL button for 10-
15 seconds.
b)
Re-check fluid level, repeat step “a)” if necessary.
If level is high:
c)
When complete light is on, press and hold the DRAIN button for 10-30 seconds.
d)
Re-check fluid level, repeat step “c) ” if necessary.
Stop engine and let cool off if necessary.
12.
Disconnect hoses from TRANSTECH and connect the vehicle’s cooler lines to their original connection ports.
13.
Start the engine, check cooler lines for leaks, and re-tighten as necessary.
14.
Step on the foot brake firmly, then slowly shift the gear lever to Low Gear (first gear) then back to Park. Do
final check of transmission’s fluid level.
15.
Empty waste fluid tank.
